Surface of room temperature ionic liquid [bmim][PF6] studied by polarization- and experimental configuration-dependent sum frequency generation vibrational spectroscopy

Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.     

Observation and analysis of near-surface atmospheric aerosol optical properties in urban Beijing

Year-round measurements of the mass concentration and optical properties of fine aerosols(PM_2.5) from June 2009 to May 2010 at an urban site in Beijing were analyzed.The annual mean values of the PM_2.5 mass concentration,absorption coefficient（Ab）,scattering coefficient（Sc） and single scattering albedo（SSA）at 525 nm were 67±66μg/m³,64 ±62 Mm^-1,360 ±405 Mm^-1 and 0.82 ±0.09,respectively.The bulk mass absorption efficiency and scattering efficiency of the PM_2.5 at 525 nm were 0.78 m²/g and 5.55 m²/g,respectively.The Ab and Sc showed a similar diurnal variation with a maximum at night and a minimum in the afternoon,whereas SSA displayed an opposite diurnal pattern.Significant increases in the Ab and Sc were observed in pollution episodes caused by the accumulation of pollutants from both local and regional sources under unfavorable weather conditions.Aerosol loadings in dust events increased by several times in the spring,which had limited effects on the Ab and Sc due to the low absorption and scattering efficiency of dust particles.The frequency of haze days was the highest in autumn because of the high aerosol absorption and scattering under unfavorable weather conditions.The daily PM_2.5concentration should be controlled to a level lower than 64 μg/m³ to prevent the occurrence of haze days according to its exponentially decreased relationship with visibility.     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

The case of triethylammonium cation loss during purification of certain nucleotide analogues: a cautionary note

Nucleotides, their analogues, and other phosphate esters and phosphoramidates often contain the triethylammonium cation as a counterion. We found that this may be lost during chromatographic purification or concentration of solutions, yielding products in acidic forms or containing sub-stoichiometric amounts of the counterion. This in turn may be detrimental, e.g., due to possible decomposition of a compound or inaccurate sample preparation. Correlations between the structure of studied compounds and their susceptibility for cation loss were analyzed. Modifications in preparative techniques were developed to obtain the studied compounds with stoichiometric anion to cation ratios.

?

Open image in new window

Graphical Abstract Triethylammonium salts of phosphate esters and phosphoramidates may lose the cationic component during chromatography or evaporation of solvent

     

Assessing the role of chemical components in cellular responses to atmospheric particle matter (PM) through chemical fractionation of PM extracts

In order to further our understanding of the influence of chemical components and ultimately specific sources of atmospheric particulate matter (PM) on pro-inflammatory and other adverse cellular responses, we promulgate and apply a suite of chemical fractionation tools to aqueous aerosol extracts of PM samples for analysis in toxicity assays. We illustrate the approach with a study that used water extracts of quasi-ultrafine PM (PM_0.25) collected in the Los Angeles Basin. Filtered PM extracts were fractionated using Chelex, a weak anion exchanger diethylaminoethyl (DEAE), a strong anion exchanger (SAX), and a hydrophobic C18 resin, as well as by desferrioxamine (DFO) complexation that binds iron. The fractionated extracts were then analyzed using high-resolution sector field inductively coupled plasma mass spectrometry (SF-ICPMS) to determine elemental composition. Cellular responses to the fractionated extracts were probed in an in vitro rat alveolar macrophages model with measurement of reactive oxygen species (ROS) production and the cytokine tumor necrosis factor-α (TNF-α). The DFO treatment that chelates iron was very effective at reducing the cellular ROS activity but had only a small impact on the TNF-α production. In contrast, the hydrophobic C18 resin treatment had a small impact on the cellular ROS activity but significantly reduced the TNF-α production. The use of statistical methods to integrate the results across all treatments led to the conclusion that sufficient iron must be present to participate in the chemistry needed for ROS activity, but the amount of ROS activity is not proportional to the iron solution concentration. ROS activity was found to be most related to cationic mono- and divalent metals (i.e., Mn and Ni) and oxyanions (i.e., Mo and V). Although the TNF-α production was not significantly affected by the chelexation of iron, it was greatly impacted by the removal of organics with the C18 resin and all other metal removal methods, suggesting that iron is not a critical pathway leading to TNF-α production, but a wide range of soluble metals and organic compounds in particulate matter play a role. Although the results are specific to the Los Angeles Basin, where the samples used in the study were collected, the method employed in the study can be widely employed to study the role of components of particulate matter in in vitro or in vivo assays.     

A surface wipe sampling and LC–MS/MS method for the simultaneous detection of six antineoplastic drugs commonly handled by healthcare workers

An effective wipe sampling and LC–MS/MS method was developed to simultaneously analyze six commonly administered antineoplastic drugs in stainless steel surface. The analyzed drugs were methotrexate, paclitaxel, cyclophosphamide, 5-fluorouracil, vincristine, and oxaliplatin, a frequently prepared antineoplastic drug that has not been included among any of the published simultaneous detection methods. The established method was used to evaluate the recoveries of antineoplastic drugs on brand new and worn stainless steel surfaces by wiping the plates with a Whatman filter paper wetted with 0.5 mL of water/methanol (20:80) with 0.1 % formic acid followed by LC–MS/MS before desorbing the filter with a water/methanol (50:50) solution. A significant decrease in the recovery of all evaluated drugs was found when worn plates were used. Additionally, the inter-personnel variability on drug recoveries during wiping procedures was evaluated. Significantly higher recoveries were achieved by the personnel with more training and experience versus personnel without prior experience. Finally, a laboratory stability test was developed to assess the degradation of the antineoplastic drugs during replicated shipping conditions. With the exception of vincristine sulfate which exhibited a significant (p?<?0.05) degradation after 48 h, all evaluated drugs were stable during the first 24–48 h. However, after 144 h, an increase in the degradation of all evaluated drugs was observed, with oxaliplatin and 5-fluorouracil exhibiting the most degradation.     

Simultaneous adsorption and dechlorination of carbon tetrachloride using copper nanoparticles@graphene oxide composites

Cu nanoparticles@graphene oxide composites (CGC) were synthesized by a simplistic and effective chemical reduction method. The resulting CGC composites were characterized by X-ray diffraction, scanning electron microscopy with energy dispersive X-ray analysis, transmission electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The performance of the CGC composites for dechlorination of carbon tetrachloride was evaluated. The batch investigations indicated that carbon tetrachloride could be almost completely removed by CGC after 75 min. The adsorption isotherm was also discussed. The high removal capacities of CGC with respect to the bare nanoscale zerovalent copper owe to the increased adsorption sites in the composites that are resulted from aggregation inhibition, which leads to the reduced Cu nanoparticles size.     

Monodispersed AuPd nanoalloy: composition control synthesis and catalytic properties in the oxidative dehydrogenative coupling of aniline

A series of AuPd@C nanoalloy catalysts with tunable compositions were successfully prepared by a co-reduction method. The use of borane-tert-butylamine complex as reductant and oleylamine as both solvent and reductant was very effective for the preparation of the monodispersed nanoalloy. We evaluated the catalytic activity of these AuPd@C nanoalloys for oxidative dehydrogenative coupling of aniline, which showed better catalytic activity than equal amounts of sole Au@C or Pd@C catalyst. The Au₁Pd₃@C catalyst exhibited the best performance, indicating that the conversion and selectivity were improved along with the increase of Pd composition. However if the Pd composition was too high in the AuPd alloy, Au₁Pd₇@C achieved only 81% conversion in this reaction.     

Synthesis,characterization and crystal structures of new Zinc(II) and Nickel(II) complexes containing morpholine moiety and their antibacterial studies

The ligand 1,2-dimorpholinoethane (DME) was used to prepare Zn(II) and Ni(II) complexes of the general formulation MLX₂ (L = DME, X = Cl or NO₃). Zinc(II) complex exhibits spectral properties indicative of a distorted tetrahedral geometry, with DME coordinating through two nitrogen atoms and two chlorides completing the tetrahedron. This is in contrast to the six-coordinated, distorted octahedral geometry exhibited by nickel(II) complex of DME when NO₃ was used as counter ions. The X-ray diffraction confirms the structures of two complexes and shows that the ligand coordinates through two nitrogen atoms while the two ether linkages are not involved in complexation, which would have been the case if the morpholine rings were in the boat form. The ligand and related complexes have antibacterial activity against the five Gram-positive bacteria: Bacillus subtilis ATCC 6633, Staphylococcus aureus ATCC 6538, Bacillus cereus NRRL-B-3711, Enterococcus faecalis ATCC 29212 and Streptococcus pyogenes and also against the three Gram-negative bacteria: Escherichia coli ATCC 11230, Pseudomonas aeruginosa ATCC 15442 and Klebsiella pneumonia ATCC 70063. The results showed that in some cases the antibacterial activity of the complexes exceeded the one of sulfisoxazole used as a standard.     

Vibration Spectroscopy Stability Investigation of 12-Tungstosilicic Acid Solution

Heteropoly acids (HPA) attract the attention of large variety of scientists, due to HPA’s extraordinary interesting properties and possible application fields. 12-tungstosilicic acid (WSiA), the Keggin type HPA, has some promising characteristic to be used in catalytic processes, but with not well-defined stability. Raman spectroscopy was used for in situ analysis of WSiA hydrolysis in detail in a wide pH range of 1–12. Raman spectroscopy is able to give an almost immediate response/spectrum as a representation of the exact profile/composition of the solution. This method and FTIR spectroscopy, as a complementary technique, enabled recording of the solid and liquid phases of the same sample under different conditions. Our results confirm that the decomposition pathways of WSiA in solution proceed via the formation of the lacunary monovacant anion at pH > 6.4. This anion is a major constituent in pH range up to 9.5. With further increases in pH this species convert to the trivacant lacunary anion. The total decomposition of the Keggin anion to silicate and tungstate occurs at pH > 11.0. The results of the performed study contribute to understand the behavior of WSiA in the water–methanol solution, as the model system of aqueous-organic system. It is concluded that addition of methanol in aqueous solution of WSiA leads to expansion of the pH region where Keggin anion is stable up to 8.1 and above this pH value, precipitation occurs. The obtained data clarify the stability range of WSiA in both water and water–methanol solutions, as well.